[cisco-voip] 2821 w/ EVM-HD Module SCCP Gateway

[Kris Seraphine]

Hi

I need to convert a few FXS ports on a 2821 router's EVM-HD module from MGCP
to SCCP this evening.  I'm doing the CCM configuration now in preparation
for the router changes after hours.  When I add the gateway in CCM
Administration and specify EVM-HD module in Slot 2 I'm given three  subunit
menus.  For subunit 0 I choose EVM-HD 8FXS-DID and that gives me port 2/0/0
through 2/0/7.  In subunit 1 I choose EM-HDA-8FXS and that gives me ports
2/1/0 through 2/1/7.  The problem is these ports are number 2/0/8 through
2/0/15 on the router.  I'm guessing this won't work when the ports try to
register.

Has anyone else come across this before?  I'm using CM 5.1.2.

thanks in advance

-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071221/4ed61b94/attachment.html