[cisco-voip] In what cases does the dialed number change on the calling terminal?

[Simon, Bill]

One more plea for help on this then I give up.  I get the feeling this 
can't be done.

Imagine you are forwarding a call that is supposed to "look" internal to 
an off-net location and it would be better for the user not to see where 
it's going.  That's what I'm after.


Simon, Bill wrote:
> Any way to change this behavior?
> 
> We need to set up route points where the called number doesn't change on 
> the display of an internal IP phone, and hunt pilot/list/LG won't do the 
> trick.
> 
> 
>> However, for translation patterns (and CTI Route Points that connect via 
>> a CTI port), the called number appears as the final connected port, not 
>> the route point.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-- 
Bill Simon - bills at tns.its.psu.edu - (814) 865-2270
http://tns.its.psu.edu/