[cisco-voip] In what cases does the dialed number change on the calling terminal?

[Ryan Ratliff]

Have you looked at the Connected Party Transformations on the hunt  
pilot?  You can restrict the name and number there on both CM 4.1(3)  
and 4.2.


-Ryan

On Jan 4, 2007, at 10:48 AM, Simon, Bill wrote:

One more plea for help on this then I give up.  I get the feeling this
can't be done.

Imagine you are forwarding a call that is supposed to "look" internal to
an off-net location and it would be better for the user not to see where
it's going.  That's what I'm after.


Simon, Bill wrote:
> Any way to change this behavior?
>
> We need to set up route points where the called number doesn't  
> change on
> the display of an internal IP phone, and hunt pilot/list/LG won't  
> do the
> trick.
>
>
>> However, for translation patterns (and CTI Route Points that  
>> connect via
>> a CTI port), the called number appears as the final connected  
>> port, not
>> the route point.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-- 
Bill Simon - bills at tns.its.psu.edu - (814) 865-2270
http://tns.its.psu.edu/
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip