[cisco-voip] In what cases does the dialed number change on the calling terminal?

[Simon, Bill]

Yes but I am not sure how to use hunt pilot for this type of thing.  I 
thought you can only add local phones (DNs) to a linegroup.  We need to 
add a pattern that routes off-net.

Ryan Ratliff wrote:
> Have you looked at the Connected Party Transformations on the hunt 
> pilot?  You can restrict the name and number there on both CM 4.1(3) and 
> 4.2.
> 
> 
> -Ryan
> 
> On Jan 4, 2007, at 10:48 AM, Simon, Bill wrote:
> 
> One more plea for help on this then I give up.  I get the feeling this
> can't be done.
> 
> Imagine you are forwarding a call that is supposed to "look" internal to
> an off-net location and it would be better for the user not to see where
> it's going.  That's what I'm after.
> 
> 
> Simon, Bill wrote:
>> Any way to change this behavior?
>>
>> We need to set up route points where the called number doesn't change on
>> the display of an internal IP phone, and hunt pilot/list/LG won't do the
>> trick.
>>
>>
>>> However, for translation patterns (and CTI Route Points that connect via
>>> a CTI port), the called number appears as the final connected port, not
>>> the route point.