[cisco-voip] In what cases does the dialed number change on the calling terminal?

[Ryan Ratliff]

Another options is the CM service parameter "Always Display Original  
Dialed Number*".  This is global however so may be overkill.

-Ryan

On Jan 4, 2007, at 11:06 AM, Simon, Bill wrote:

Yes but I am not sure how to use hunt pilot for this type of thing.   
I thought you can only add local phones (DNs) to a linegroup.  We  
need to add a pattern that routes off-net.

Ryan Ratliff wrote:
> Have you looked at the Connected Party Transformations on the hunt  
> pilot?  You can restrict the name and number there on both CM 4.1 
> (3) and 4.2.
> -Ryan
> On Jan 4, 2007, at 10:48 AM, Simon, Bill wrote:
> One more plea for help on this then I give up.  I get the feeling this
> can't be done.
> Imagine you are forwarding a call that is supposed to "look"  
> internal to
> an off-net location and it would be better for the user not to see  
> where
> it's going.  That's what I'm after.
> Simon, Bill wrote:
>> Any way to change this behavior?
>>
>> We need to set up route points where the called number doesn't  
>> change on
>> the display of an internal IP phone, and hunt pilot/list/LG won't  
>> do the
>> trick.
>>
>>
>>> However, for translation patterns (and CTI Route Points that  
>>> connect via
>>> a CTI port), the called number appears as the final connected  
>>> port, not
>>> the route point.