[cisco-voip] CCM shared line like in CME

[Patrick Mowry]

Just out of curiosity, what is it you are trying to do?
The only time I have used an overlay button in CME was to simulate the
operation of a broadcast hunt group that is native to CM, but not in
CME.

-Patrick

  ----- Original Message ----- 
  From: Jozef Janitor 
  To: cisco-voip at puck.nether.net 
  Sent: Thursday, January 04, 2007 2:56 PM
  Subject: [cisco-voip] CCM shared line like in CME


  Hi,

   

  Is it possible to configure the "big" CCM (4.x) to have a shared line
feature assigned to a button?

  I am creating these shared lines on CME this way:

   

  ephone-dn 1

   number 1000

  ephone-dn 2

   number 1001

  ephone 1

   mac-address 1234.5678.1234

   type 7940

   button 1o1,2

   

  But in CCM configuration I can't see a possibility to assign another
DN to a line. 

  Do you have any suggestion please?

   

  Thank you.

   

  Best regards,

     Jozef Janitor