[cisco-voip] Bogen TAM-B to VIC2-2FXS

[Robert Singleton]

On Fri, 2007-01-05 at 12:35 -0600, Kris Seraphine wrote:
> Hi
> 
> Does anyone have a Bogen TAM-B connected to a FXS port in a router for
> overhead paging working successfully? 

I do not have one currently. I had a TAMB connected to an FXS port on an
NM-HDA card in a 2600 router once. That location was upgraded to a 2811
and in the process, we moved paging to a port on an ATA-188.

> but as I look at the Bogen specs now it wants 90 volts for ring
> voltage and I don't think the FXS ports can supply that much.

Are you troubleshooting a TAMB that won't answer or are you planning
ahead? I think I'd just try it before I worried about it too much...

Robert