[cisco-voip] Bogen TAM-B to VIC2-2FXS

[Lelio Fulgenzi]

I think you will. If not, you could always use one of those viking voltage boxes.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Kris Seraphine 
  To: Lelio Fulgenzi 
  Cc: Robert Singleton ; cisco-voip 
  Sent: Monday, January 08, 2007 11:41 AM
  Subject: Re: [cisco-voip] Bogen TAM-B to VIC2-2FXS


  I spec'd it for a new CME install and just wanted to make sure I wasn't getting myself into trouble.  I'm pretty sure I'll be OK.  I'll make sure I have an ATA and E/M card with me just in case.  

  Thanks


  On 1/6/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

    We have TAM-Bs working on VG248's without incident. I have a spare one I could test with an FXS port, but I'd have to jury rig something to test it going to a boombox or something. Actually I could probably test it and as long as it answered, it should be good enough, eh?

      ----- Original Message ----- 
      From: Robert Singleton 
      To: cisco-voip 
      Sent: Friday, January 05, 2007 5:40 PM
      Subject: Re: [cisco-voip] Bogen TAM-B to VIC2-2FXS


      On Fri, 2007-01-05 at 12:35 -0600, Kris Seraphine wrote:
      > Hi
      > 
      > Does anyone have a Bogen TAM-B connected to a FXS port in a router for
      > overhead paging working successfully? 

      I do not have one currently. I had a TAMB connected to an FXS port on an
      NM-HDA card in a 2600 router once. That location was upgraded to a 2811
      and in the process, we moved paging to a port on an ATA-188.

      > but as I look at the Bogen specs now it wants 90 volts for ring
      > voltage and I don't think the FXS ports can supply that much.

      Are you troubleshooting a TAMB that won't answer or are you planning
      ahead? I think I'd just try it before I worried about it too much...

      Robert


      _______________________________________________
      cisco-voip mailing list
      cisco-voip at puck.nether.net
      https://puck.nether.net/mailman/listinfo/cisco-voip


    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip






  -- 
  kris seraphine 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070108/e60b8a26/attachment.html