[cisco-voip] Calls hang at voice gateway FXO port.
Jonathan Charles
jonvoip at gmail.com
Wed Jan 10 08:11:08 EST 2007
I tested the command on a Cisco 1760...
C1760#clear call voice causecode 1 id 1B49
C1760#
Jonathan
On 1/10/07, Ranjan Babu .G <ranjan.ganesh at gavsin.com> wrote:
>
>
>
> Hi,
>
>
>
> Thanks for update.We are using 1760 router .
>
> The command *clear call voice causecode 1 id [call id number] *not working
> .Any other command available.
>
>
>
> Regards,
>
> Ranjan
>
>
>
> Cisco Internetwork Operating System Software
>
> IOS (tm) C1700 Software (C1700-SV3Y-M), Version 12.3(3), RELEASE SOFTWARE
> (fc2)
>
> Copyright (c) 1986-2003 by cisco Systems, Inc.
>
> Compiled Tue 19-Aug-03 14:42 by dchih
>
> Image text-base: 0x80008120, data-base: 0x8102FF08
>
>
>
> ROM: System Bootstrap, Version 12.2(4r)XL, RELEASE SOFTWARE (fc1)
>
>
>
> voip uptime is 1 week, 2 days, 17 hours, 15 minutes
>
> System returned to ROM by power-on
>
> System image file is "flash:c1700-sv3y-mz.123-3.bin"
>
>
>
> cisco 1760 (MPC860P) processor (revision 0x200) with 57151K/8385K bytes of
> memor
>
> y.
>
> Processor board ID VMS0621071E (1569972325), with hardware revision BB67
>
> MPC860P processor: part number 5, mask 2
>
> Bridging software.
>
> X.25 software, Version 3.0.0.
>
> 1 FastEthernet/IEEE 802.3 interface(s)
>
> 1 Serial(sync/async) network interface(s)
>
> 6 Voice FXO interface(s)
>
> 32K bytes of non-volatile configuration memory.
>
> 32768K bytes of processor board System flash (Read/Write)
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------
>
> *From:* Jonathan Charles [mailto:jonvoip at gmail.com]
> *Sent:* Tuesday, January 09, 2007 6:53 PM
> *To:* Ranjan Babu .G
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Calls hang at voice gateway FXO port.
>
>
>
> clear call voice causecode 1 id [call id number]
>
>
>
>
> Jonathan
>
> On 1/9/07, *Ranjan Babu .G* <ranjan.ganesh at gavsin.com > wrote:
>
> Hi,
>
> How to kill specific call in 1700 voice gateway FXO port.
> Most time we found BW utilization above 200KB calls are hang , any
> reason ?
>
>
> tkvoip#sh voice call status
> CallID CID ccVdb Port DSP/Ch Called # Codec
> Dial-peers
>
> 0x823 1B39 0x81EB2A70 3/1 0/1 *7730815580 g729r8 3/7
>
> 0x825 1C39 0x81EAB52C 0/1 0/1 *67210 g729r8 3/9
>
> 0x88F 539 0x81EA9900 0/0 0/2 *7710039340 g729br8 0/8
>
> 0x890 15C8 0x81EB0D1C 3/0 0/2 7215 g729r8 6/3
>
> 0x898 15CE 0x81EAD274 2/0 0/2 7214 g729r8 11/3
>
> 0x89B 939 0x81EAEFC8 2/1 0/1 *4646491617 None 3/5
>
> 6 active calls found
>
>
> Regards,
> Ranjan
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070110/96045d1f/attachment-0001.html
More information about the cisco-voip
mailing list