[cisco-voip] Calls hang at voice gateway FXO port.

[Patrick Diener]

Ranjan try the command without the 'voice' keyword

according to the command ref. the voice keyword was added in IOS
Version 12.3(4)T and you are using 12.3.3 Main Line...


On 1/10/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> I tested the command on a Cisco 1760...
>
> C1760#clear call voice causecode 1 id 1B49
> C1760#
>
>
>
>
>
>
> Jonathan
>
> On 1/10/07, Ranjan Babu .G <ranjan.ganesh at gavsin.com> wrote:
> >
> >
> >
> >
> >
> >
> >
> > Hi,
> >
> >
> >
> > Thanks for update.We are using 1760 router .
> >
> > The command clear call voice causecode 1 id [call id number] not working
> .Any other command available.
> >
> >
> >
> > Regards,
> >
> > Ranjan
> >
> >
> >
> > Cisco Internetwork Operating System Software
> >
> > IOS (tm) C1700 Software (C1700-SV3Y-M), Version 12.3(3), RELEASE SOFTWARE
> (fc2)
> >
> > Copyright (c) 1986-2003 by cisco Systems, Inc.
> >
> > Compiled Tue 19-Aug-03 14:42 by dchih
> >
> > Image text-base: 0x80008120, data-base: 0x8102FF08
> >
> >
> >
> > ROM: System Bootstrap, Version 12.2(4r)XL, RELEASE SOFTWARE (fc1)
> >
> >
> >
> > voip uptime is 1 week, 2 days, 17 hours, 15 minutes
> >
> > System returned to ROM by power-on
> >
> > System image file is "flash:c1700-sv3y-mz.123-3.bin"
> >
> >
> >
> > cisco 1760 (MPC860P) processor (revision 0x200) with 57151K/8385K bytes of
> memor
> >
> > y.
> >
> > Processor board ID VMS0621071E (1569972325), with hardware revision BB67
> >
> > MPC860P processor: part number 5, mask 2
> >
> > Bridging software.
> >
> > X.25 software, Version 3.0.0.
> >
> > 1 FastEthernet/IEEE 802.3 interface(s)
> >
> > 1 Serial(sync/async) network interface(s)
> >
> > 6 Voice FXO interface(s)
> >
> > 32K bytes of non-volatile configuration memory.
> >
> > 32768K bytes of processor board System flash (Read/Write)
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ________________________________
>
> >
> > From: Jonathan Charles [mailto:jonvoip at gmail.com]
> > Sent: Tuesday, January 09, 2007 6:53 PM
> > To: Ranjan Babu .G
> > Cc: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] Calls hang at voice gateway FXO port.
> >
> >
> >
> > clear call voice causecode 1 id [call id number]
> >
> >
> >
> >
> > Jonathan
> >
> >
> > On 1/9/07, Ranjan Babu .G < ranjan.ganesh at gavsin.com > wrote:
> >
> > Hi,
> >
> > How to kill specific call in 1700 voice gateway FXO port.
> > Most time we found BW utilization above 200KB calls are hang , any
> > reason ?
> >
> >
> > tkvoip#sh voice call status
> > CallID     CID  ccVdb      Port      DSP/Ch  Called #
> Codec
> > Dial-peers
> >
> > 0x823      1B39 0x81EB2A70 3/1       0/1    *7730815580 g729r8   3/7
> >
> > 0x825      1C39 0x81EAB52C 0/1       0/1    *67210      g729r8   3/9
> >
> > 0x88F      539  0x81EA9900 0/0       0/2    *7710039340 g729br8  0/8
> >
> > 0x890      15C8 0x81EB0D1C 3/0       0/2     7215       g729r8   6/3
> >
> > 0x898      15CE 0x81EAD274 2/0       0/2     7214       g729r8   11/3
> >
> > 0x89B      939  0x81EAEFC8 2/1       0/1    *4646491617 None     3/5
> >
> > 6 active calls found
> >
> >
> > Regards,
> > Ranjan
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>