[cisco-voip] Calls hang at voice gateway FXO port.

[Ranjan Babu .G]

Hi,

 

Not working . error msg. IOS (tm) C1700 Software (C1700-SV3Y-M), Version
12.3(3), RELEASE SOFTWARE (fc2)

 

 

stkvoip#clear call voice causecode 1 id 1B49

                   ^

% Invalid input detected at '^' marker.

 

stkvoip#clear CSL

stkvoip#clear cal

stkvoip#clear call ?

  threshold  Clear stats about resource measurement

  treatment  Clear commands for call admission

 

stkvoip#clear call

 

 

 

 

 

 

 

  _____  

From: Jonathan Charles [mailto:jonvoip at gmail.com] 
Sent: Wednesday, January 10, 2007 6:41 PM
To: Ranjan Babu .G
Cc: cisco-voip at puck.nether.net
Subject: Re: Calls hang at voice gateway FXO port.

 

I tested the command on a Cisco 1760...

C1760#clear call voice causecode 1 id 1B49
C1760#






Jonathan

On 1/10/07, Ranjan Babu .G <ranjan.ganesh at gavsin.com> wrote:

 

Hi,

 

Thanks for update.We are using 1760 router .

The command clear call voice causecode 1 id [call id number] not working
.Any other command available.

 

Regards,

Ranjan 

 

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-SV3Y-M), Version 12.3(3), RELEASE
SOFTWARE (fc2)

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Tue 19-Aug-03 14:42 by dchih

Image text-base: 0x80008120, data-base: 0x8102FF08

 

ROM: System Bootstrap, Version 12.2(4r)XL, RELEASE SOFTWARE (fc1)

 

voip uptime is 1 week, 2 days, 17 hours, 15 minutes

System returned to ROM by power-on

System image file is "flash:c1700-sv3y-mz.123-3.bin"

 

cisco 1760 (MPC860P) processor (revision 0x200) with 57151K/8385K bytes
of memor

y.

Processor board ID VMS0621071E (1569972325), with hardware revision BB67

MPC860P processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

1 Serial(sync/async) network interface(s)

6 Voice FXO interface(s)

32K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)

 

 

 

 

 

 

 

 

 

  _____  

From: Jonathan Charles [mailto:jonvoip at gmail.com] 
Sent: Tuesday, January 09, 2007 6:53 PM
To: Ranjan Babu .G
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Calls hang at voice gateway FXO port.

 

clear call voice causecode 1 id [call id number]




Jonathan

On 1/9/07, Ranjan Babu .G < ranjan.ganesh at gavsin.com
<mailto:ranjan.ganesh at gavsin.com> > wrote:

Hi,

How to kill specific call in 1700 voice gateway FXO port.
Most time we found BW utilization above 200KB calls are hang , any
reason ?


tkvoip#sh voice call status
CallID     CID  ccVdb      Port      DSP/Ch  Called #   Codec
Dial-peers

0x823      1B39 0x81EB2A70 3/1       0/1    *7730815580 g729r8   3/7 

0x825      1C39 0x81EAB52C 0/1       0/1    *67210      g729r8   3/9

0x88F      539  0x81EA9900 0/0       0/2    *7710039340 g729br8  0/8

0x890      15C8 0x81EB0D1C 3/0       0/2     7215       g729r8   6/3 

0x898      15CE 0x81EAD274 2/0       0/2     7214       g729r8   11/3

0x89B      939  0x81EAEFC8 2/1       0/1    *4646491617 None     3/5

6 active calls found


Regards,
Ranjan


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070111/f96f2486/attachment-0001.html