[cisco-voip] operator phone line number

[Justin Steinberg]

here is what you want to do....


ephone-dn 1 dual-line
 number 1001
 no huntstop
 huntstop channel

ephone-dn 2 dual-line
 number 1001
 no huntstop
 huntstop channel
 preference 1

ephone-dn 3 dual-line
 number 1001
 huntstop channel
 preference 2

ephone 1
 button 1:1 2:2 3:3
 mac-address 0030.94c3.8724


With this config, the first call to operator rings line button 1, the
second call rings line button 2, 3 etc.  Operator can still transfer
the caller.

HTH

justin



On 1/11/07, gokhan senol <gokhanciscottl at yahoo.com> wrote:
>
> hi
>
> 2851 ccme.  operator phone is 7961
>
> i know 7961 has 6 buttons  2 for line and 4 for speed dial
>
> i configured the ephone as dual-line.  but phone can answer only 2 calls
> at the same time. is it possible to increase this number.
>
> because when 2 calls come to the operator phone, and if one of them should
> be transferred to another extension then operator can not do it. because
> operator's both of the 2 lines are busy.
>
>
>
> thanks  a lot
>
> a
>
> ------------------------------
> Everyone is raving about the all-new Yahoo! Mail beta.<http://us.rd.yahoo.com/evt=45083/*http://advision.webevents.yahoo.com/mailbeta>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070111/d616cf06/attachment-0001.html