[cisco-voip] isdn bind-l3 ccm-manager

[Steve G]

Group,
    I was making a network change last night and had an odd result.  I had a
2821 with an MGCP PRI and 2 WIC cards with PtP T1s.  I took the WIC cards
out and installed them in a 1760 to separate the WAN function from the VG
functions.  After taking out the 2 WICs I applied the following changes to
the 2821 VG....

*IP addresses taken out to maintain some anonymity*
!
logging buffered 64000 debugging
!
!
no ip dhcp use vrf connected
no ip dhcp excluded-address x.x.x.x
no ip dhcp excluded-address x.x.x.x
!
no ip dhcp pool techs-only
!
no ip dhcp pool PHONES
!
!
!
!
!
!
!
interface Loopback0
 description H323/MOH/Multicast
 ip address xxx.xxx.xxx.xxx 255.255.255.255

 !!!!!!!!!!!!!!!!!!!!!!!!!!! Add these commands, not present prior to change
 h323-gateway voip interface
 h323-gateway voip bind srcaddr xxx.xxx.xxx.xxx
!
interface GigabitEthernet0/0.100
 !!!!!!!!!!!!!!!!Change IP to non-default gateway
 ip address x.x.x.x 255.255.255.192

!
no interface GigabitEthernet0/0.200

!
interface GigabitEthernet0/1
no ip address
shut

!

!
router eigrp 1
 no network xxx.xxx.xxx.xxx 0.0.0.3
 no network xxx.xxx.xxx.xxx 0.0.0.3
 no network xxx.xxx.xxx.xxx 0.0.0.255
 no network xxx.xxx.xxx.xxx 0.0.0.15

no ip route 0.0.0.0 0.0.0.0 YYY.yyy.yyy.yyy
ip route 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX

!
dspfarm profile 20 transcode
!!!!!!!!!!!!!!!!!!!!!
 no shut
!
!

end

wr mem

As you can see I did not take out the "isdn bind-l3 ccm-manager" command
from the ser0/2/0:23 interface.  The only thing that I can think may have
done this was the Lo0 commands that I added for h323 binding.

Anyone have an answer as to why this would have happened and made for an
uneasy change?

Steve
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070117/184a8cb8/attachment-0001.html