[cisco-voip] Call Manager Express

[Mike Lay (milay)]

You did not mention the type of phone nor the phone load being used.
There were a couple of similar issues resolved for the phones below in
the listed phone loads.
 
IP Phone 7941/7961	  SCCP41.8-2-1S	
IP Phone 7970/7971	  SCCP70.8-2-1S	
 
Mike

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Coner
(US)
Sent: Thursday, January 18, 2007 8:33 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Call Manager Express



I'm seeing random phones on call manager express go into a state where
if you pick up the handset there is no dial tone.  You have to also
press a line button to get dial tone.  If I reset the phone it will go
back to normal.  Anyone seen this?

 

CME 4.0(3)

IOS 12.4(4)XC4

 

 

Scott

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070118/b8079425/attachment-0001.html