[cisco-voip] CCM "provide out-side dial tone" problem

[Alan Su]

Dear Mike,

Thanks a lot for the guide, but after checking all the DNs, patterns,
meet-me number... etc., there is no overlap. But after I dialed "9", CCM
seems forward it to gateway directly instead of providing the dial tone. Is
there any other configuration I need to double verify? Many thanks for your
kind help.

Regards,
Alan


2007/1/18, Mike Lay (milay) <milay at cisco.com>:
>
>
> http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item09186a00800a6763.shtml#q13
>
> Mike
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Alan Su
> *Sent:* Wednesday, January 17, 2007 10:20 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] CCM "provide out-side dial tone" problem
>
>
>  Dear All,
>
> I have a route pattern "9" in CCM 4.02 which pointing to a voice gateway,
> the voice gateway have severial dial-peers with destination pattern begging
> with 9 (such as 91315T, 91206T... etc). What I tried to do is when user dial
> "9", he/she can hear a dial tone from CCM and then he/she can dial the
> following digits(ex: 13153824604) and gateway will pick the matched
> dial-peer to send the digits to remote site voice gateway and then to PSTN
> for toll saving. I already check the "provide outside dial tone" in route
> pattern, but there is no dial tone provided after dialing "9". What else
> configuration I need to do in CCM or in voice gateway? Any comments will be
> truely grateful. Thanks a lot.
>
> Regards,
> Alan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070119/3fe3655d/attachment.html