[cisco-voip] CCM "provide out-side dial tone" problem

[Mike Lay (milay)]

http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item0
9186a00800a6763.shtml#q13
 
Mike

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Alan Su
Sent: Wednesday, January 17, 2007 10:20 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM "provide out-side dial tone" problem


Dear All,
 
I have a route pattern "9" in CCM 4.02 which pointing to a voice
gateway, the voice gateway have severial dial-peers with destination
pattern begging with 9 (such as 91315T, 91206T... etc). What I tried to
do is when user dial "9", he/she can hear a dial tone from CCM and then
he/she can dial the following digits(ex: 13153824604) and gateway will
pick the matched dial-peer to send the digits to remote site voice
gateway and then to PSTN for toll saving. I already check the "provide
outside dial tone" in route pattern, but there is no dial tone provided
after dialing "9". What else configuration I need to do in CCM or in
voice gateway? Any comments will be truely grateful. Thanks a lot. 
 
Regards,
Alan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070117/2ea5003a/attachment-0001.html