[cisco-voip] Does 12.4(11)T now do H.323 to H.320 conversions?

[Wes Sisk]

It's a new feature.

you need a video PRI that supported bonded b-ch

it allows IOS to act like you TDM to IP video gateway.

VTA--CM--IOS--PRI--PSTN---VideoDevice

/Wes

Robert Kulagowski wrote:
> There's a feature in 12.4(11)T described in 
> http://www.cisco.com/en/US/customer/products/ps6441/products_feature_guide09186a0080788070.html
>
> "The Integrated Data, Voice, and Video Services for ISDN Interfaces 
> feature allows multimedia communications between H.320 endpoints and 
> H.323 or Skinny Client Control Protocol (SCCP) endpoints."
>
> In reading it a few times, I'm still trying to understand if it means 
> that I can now have a H.323 Polycom EX make and receive calls on a 2851 
> router that has a standard voice PRI or do I still need to get an IP/VC 
> box.
>
> Also, the examples are terrible.  There's no diagram, there's no 
> explanation of what session targets are connnected to, etc.  This is a 
> fairly recent IOS, so I'm not sure if I'm blazing a trail here...
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>