[cisco-voip] Transfer Direct to Unity Voicemail ?

[Jason Aarons (US)]

To transfer direct to voicemail dial Transfer * plus number then
Transfer.

 

This has worked in 4.1(3)sr3c but in sr4d the Unity Call Viewer shows
the * coming into Unity, as if the CCM Voice Mail Box Mask is no longer
stripping the * ??

 

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0
9186a00800dea82.shtml

 

 

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070122/9d8f365d/attachment.html