[cisco-voip] Auto register VG224 ports on ccm5

[Mike Lay (milay)]

Quick update.
 
Currently CCM, any version, does not support Auto Registration. We do
support Auto Configuration download as long as the CCM-Manager is
configured properly in IOS. 
 
During this investigation I have seen that when adding the endpoint in
CCM the dial-peer does not get added to the GW until it is rebooted.
 
In the example below all in red is what NEEDS to be configured.
Everything green is added when the config is pulled from the CCM. 

Current configuration : 1823 bytes
!
version 12.4
service config
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname VG224
!
boot-start-marker
boot system flash slot0:vg224-i6s-mz.124-11.T.bin
boot-end-marker
!
enable secret 5 $1$6V7G$AKwBW.PeCbPm22QMu9JX91
enable password cisco
!
no aaa new-model
!
stcapp ccm-group 1
stcapp
!
voice-card 0
!
interface FastEthernet0/0
 ip address 10.89.121.198 255.255.255.0
 duplex auto
 speed auto
 no cdp enable
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
 no cdp enable
!
ip http server
!
dialer-list 1 protocol ip permit
!
control-plane
!
voice-port 2/0
 timeouts initial 60
 timeouts interdigit 60
 timeouts ringing infinity
!
voice-port 2/1
!
voice-port 2/2
!
voice-port 2/3
!
voice-port 2/4
!
voice-port 2/5
!
voice-port 2/6
!
voice-port 2/7
!
voice-port 2/8
!
voice-port 2/9
!
voice-port 2/10
!
voice-port 2/11
!
voice-port 2/12
!
voice-port 2/13
!
voice-port 2/14
!
voice-port 2/15
!
voice-port 2/16
!
voice-port 2/17
!
voice-port 2/18
!
voice-port 2/19
!
voice-port 2/20
!
voice-port 2/21
!
voice-port 2/22
!
voice-port 2/23
!
ccm-manager config server 10.89.121.196  

ccm-manager config 
ccm-manager sccp local FastEthernet0/0
ccm-manager sccp
!
sccp local FastEthernet0/0
sccp ccm 10.89.121.197 identifier 100 version 5.0.1 
sccp ccm 10.89.121.196 identifier 101 version 5.0.1 
sccp
!
sccp ccm group 1
 bind interface FastEthernet0/0
 associate ccm 100 priority 1
 associate ccm 101 priority 2
!
dial-peer voice 999200 pots
 service stcapp
 port 2/0
!
line con 0
 exec-timeout 0 0
 transport output all
line aux 0
 transport output all
line vty 0 4
 password cisco
 login
 transport input all
 transport output all
!
end

 
Mike

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Lay
(milay)
Sent: Thursday, January 18, 2007 8:48 AM
To: Jefflin Choi; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Auto register VG224 ports on ccm5


There is a bug for this issue. CSCsb21755
 
Mike

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jefflin Choi
Sent: Thursday, January 18, 2007 8:40 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Auto register VG224 ports on ccm5


Hi all,
 
Can somebody point me the docs to autoregister VG224 on CCM5 like on
VG248. Can't seem to find a good one.
 
I'll be using the VG224 for Fax/modem only. Which one is better to use,
MGCP or SCCP?
 
-Also for MGCP.... 
Device->Gateway->Add New Gateway 
Choose vg224->MGCP 
Is ip address of the gateway on "MGCP domain name"  field be used
instead of domain name?
 
Thanks in advance!
 
Jeff
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070122/aba43de8/attachment-0001.html