[cisco-voip] CME vs CM

[Voll, Scott]

OK.... To make it a little more direct.

 

I know it runs on the Router like SRST and I know it's for smaller
installs.  I have only dealt with CM but I have a site that would like a
50 phone install and was wondering what I lost with CME over CM.

 

Scott

 

________________________________

From: Hinson, Greg [mailto:Greg_Hinson at adp.com] 
Sent: Thursday, January 25, 2007 1:08 PM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CME vs CM

 

CME runs on IOS and has a different web interface. Phones register to
the router in a way similar to the way they would in SRST, with
ephone-dns and ephone assignments. Its basically an SRST router on
steroids.

 

 

-Greg

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, January 25, 2007 1:01 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CME vs CM

I know it's been asked but I can't find it.

 

What's the difference between CME and CM?  

 

Thanks

 

Scott

________________________________

This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070125/f094e2ac/attachment.html