[cisco-voip] Gatekeeper CAC + Zone Management Question

[embeleco]

And there is no way using the gatekeeper to be that specific on CAC? Like
zone 1 to zone 2 and zone 1 to zone 3 and so on? If not what is the best way
to accomplish that? If it is possible.

What are the best practices? The problem I'm facing is that the customer
would like to restrict calls zone per zone. and not calls from every zone to
just one zone.

Any ideas?


On 1/16/07, charles george <cisco1.charles at gmail.com> wrote:
>
> no i do not believe you can. What the command i gave you would do is query
> the amnount of available bandwidth before saying whther or not the call can
> be made.
>
> so the call is always good quality, or atleast the bandwidth you specified
> for each call
>
>
> On 1/16/07, embeleco <embeleco at gmail.com> wrote:
> >
> > Thanks Charles, but how does it work? Let say that the customer has only
> > 1 Gatekeeper managing 4 local zones (one gateway in each zone).. how do you
> > configure the bandwidth per two zone? For example:
> >
> > 1. From Zone 1 to Zone 2 the customer would like to have only 4
> > concurrent calls because of bw constraints.
> >
> > 2. From Zone 1 to Zone 3 the customer would like 10 calls
> >
> > 3. From Zone 1 to Zone 4 the customer would like 8 calls
> >
> > 4. From Zone 2 to Zone 3 the customer would like 5 calls
> >
> > 5. From Zone 2 to Zone 4 the customer would like 10 calls
> >
> > 6. From Zone 3 to Zone 4 the customer would like 5 calls..
> >
> > Can  I be that specific on the gatekeeper? Because the "bandwidth
> > interzone" command would restrict bandwidth for local zone to all other
> > zones.. but not to specific zones.. or I am missing something?
> >
> > Please advise.
> >
> > -J
> >
> >
> > On 1/15/07, charles george <cisco1.charles at gmail.com > wrote:
> > >
> > > bandwidth check destination
> > >
> > > this will check amonut of bandwidth before answering a request for a
> > > call. if enough allowed,if not declined
> > >
> > > hope this helps
> > >
> > >
> > >  On 1/14/07, embeleco < embeleco at gmail.com > wrote:
> > >
> > > > Hi.
> > > >
> > > > Currently a customer have 4 VoIP Gateways register to a gatekeeper.
> > > > Each of the VoIP Gateways are in a different zone ( i.e. zones) on
> > > > the gatekeeper. Is there a way to specify CallAdmision control between 2
> > > > specific sites?
> > > >
> > > > For example customer wants from Site-1 to Site-2 3 calls and from
> > > > Site-1 to Site-3 4 calls and from Site-1 to Site-4 1 call.
> > > >
> > > > Can we be this granular with the CAC on the gatekeeper? I know we
> > > > can do CAC from one zone to all remaining zones but is there a command to be
> > > > granular on zone per zone..  If not what is the best practice in order to
> > > > accomplish the above requirement? Currently most of the sites are connected
> > > > in a fully mesh topology but some of them are not directly connected.
> > > >
> > > > Any suggestion?
> > > >
> > > > Thanks in advanced.
> > > >
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > > >
> > > >
> > >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070131/4e50012b/attachment.html