[cisco-voip] Gatekeeper controlled devices with CCM4.2/IOS GK

[Jonathan Charles]

On the trunk from CCM to the GK, did you check "MTP Required"?

Where are you configuring the endpoints?





Jonathan

On 6/4/07, db7td at gmx.de <db7td at gmx.de> wrote:
> Hi,
>
> I am trying to set up an endpoint gatekeeper as decribed in CCM4 SRND. CCM registers to the GK, but CCM event log shows the following error message when trying to configure an endpoint:
>
> Warning: H323Stopped - Cisco CallManager not ready to handle calls for the indicated H323 device.
>   Device Name.: xxxxxxx
>   IP Address: xxxx
>   Device type. [Optional]: 61
>   Device description [Optional].: xxxxxxx
>   App ID: Cisco CallManager
>   Cluster ID: IPT-Cluster
>   Node ID: xxxx
> Explanation: Cisco CallManager is not ready to handle calls for the indicated H323 device.
> Recommended Action: No action is required.
>
>
> I have added the H323 end device (a Tandberg terminal) to the database as "Gatekeeper controlled H.323 Client" with appropriate GK name, E.164 value, tech-prefix (= 1#) and zone.
>
> This is the GK config:
>
> gatekeeper
>  zone local MYZONE mydomain.i invia MYZONE outvia MYZONE enable-intrazone
>  gw-type-prefix 1#* default-technology
>  no use-proxy MYZONE default inbound-to terminal
>  no use-proxy MYZONE default outbound-from terminal
>  no shutdown
>  endpoint ttl 60
>
> Calls from any (SCCP-) IP phone to the Tandberg terminal are woking, but the Tandberg can not call any CCM controlled device.
>
> Any idea what's going wrong there?
>
>
> Thanks,
>   Dietmar
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>