[cisco-voip] Gatekeeper controlled devices with CCM4.2/IOS GK

[db7td at gmx.de]

No, I have not checked it. There is only a RASAggregatorTrunk that is for gatekeeer controlled H.323 devices as described in the SRND. If I understand correctly, the GK does all the RAS stuff and forwards every call request to the CCM. This way, you can add any H323 client as usual phone (type H323 Client) to the CCM database and you have all features like search-space and so on.

However, MTP can be checked there, too. I will try this.



-------- Original-Nachricht --------
Datum: Mon, 4 Jun 2007 11:21:39 -0500
Von: "Jonathan Charles" <jonvoip at gmail.com>
An: "db7td at gmx.de" <db7td at gmx.de>
CC: cisco-voip at puck.nether.net
Betreff: Re: [cisco-voip] Gatekeeper controlled devices with CCM4.2/IOS GK

> On the trunk from CCM to the GK, did you check "MTP Required"?
> 
> Where are you configuring the endpoints?
> 
> 
> 
> 
> 
> Jonathan
> 
> On 6/4/07, db7td at gmx.de <db7td at gmx.de> wrote:
> > Hi,
> >
> > I am trying to set up an endpoint gatekeeper as decribed in CCM4 SRND.
> CCM registers to the GK, but CCM event log shows the following error message
> when trying to configure an endpoint:
> >
> > Warning: H323Stopped - Cisco CallManager not ready to handle calls for
> the indicated H323 device.
> >   Device Name.: xxxxxxx
> >   IP Address: xxxx
> >   Device type. [Optional]: 61
> >   Device description [Optional].: xxxxxxx
> >   App ID: Cisco CallManager
> >   Cluster ID: IPT-Cluster
> >   Node ID: xxxx
> > Explanation: Cisco CallManager is not ready to handle calls for the
> indicated H323 device.
> > Recommended Action: No action is required.
> >
> >
> > I have added the H323 end device (a Tandberg terminal) to the database
> as "Gatekeeper controlled H.323 Client" with appropriate GK name, E.164
> value, tech-prefix (= 1#) and zone.
> >
> > This is the GK config:
> >
> > gatekeeper
> >  zone local MYZONE mydomain.i invia MYZONE outvia MYZONE
> enable-intrazone
> >  gw-type-prefix 1#* default-technology
> >  no use-proxy MYZONE default inbound-to terminal
> >  no use-proxy MYZONE default outbound-from terminal
> >  no shutdown
> >  endpoint ttl 60
> >
> > Calls from any (SCCP-) IP phone to the Tandberg terminal are woking, but
> the Tandberg can not call any CCM controlled device.
> >
> > Any idea what's going wrong there?
> >
> >
> > Thanks,
> >   Dietmar
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >