[cisco-voip] Cisco System Speed Dials

[Lelio Fulgenzi]

Have you considered using the * key as a prefix for speed dial translations?

Say, *01 for speed dial one, *99 for the 99th?


  ----- Original Message ----- 
  From: Countryman, Edward 
  To: cisco-voip at puck.nether.net 
  Sent: Monday, June 04, 2007 7:32 PM
  Subject: [cisco-voip] Cisco System Speed Dials


  Anyone have a best practice for building/managing "system" speed dials?



  I have a need to have a single "pool" of speed dial numbers and a rather large group of identical phones that all need to have the exact SD numbers.



  The Cisco SD solution seems to require administration at each phone for this, which I would like to avoid because the numbers to change and there are a large number of stations.



  I have a couple of ideas but would be interested in any creative ideas from anyone.  This doesn't seem to be an approach from CCM.  I cannot use AC, I need hard buttons with verbose descriptions on each of approximately 14 phones that need to be identical. 



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070604/2c1b5c50/attachment.html