[cisco-voip] DTMF failure after IOS upgrades
STEVEN CASPER
SCASPER at mtb.com
Tue Jun 5 06:44:16 EDT 2007
Just upgraded my 2821 gateway routers to 12.4-13b and users on Nortel
PBXs using 500 type sets can not log into Unity. Nortel digital sets are
ok. The Nortels are connected to the gateways via MGCP controlled QSIG
PRIs. If I downgrade code back to 12.4-3b or 3g the 500 sets can log
into with no problem. Any advice or troubleshooting tips would be
appreciated.
Thanks,
Steve Casper
Voice Technologies
M&T Bank
(410) 347-6026
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee. If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission. The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
More information about the cisco-voip
mailing list