[cisco-voip] Block incoming call based on their CallerID?

[Voll, Scott]

Only if you are using a H323 VGW.  Then it's a matter of working your
translation rules.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Corbett Enders
Sent: Thursday, June 07, 2007 9:11 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Block incoming call based on their CallerID?

 

Can we block a call coming into our phone system (CM4.2) based on the
source caller ID?  Any way of sending them to a fast busy signal instead
of having the call ring our switchboard?

 

Corbett Enders

Business Development
Homes by Avi Inc.
Tel: (403) 536-7170
Fax: (403) 536-7171
Email: cenders at homesbyavi.com <mailto:cenders at homesbyavi.com>  
www.homesbyavi.com <http://www.homesbyavi.com>  

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070607/fc43fddb/attachment.html