[cisco-voip] Block incoming call based on their CallerID?

[Paul Choi]

Scott,

Could you please give an example of this? Say you were
trying to block 19005559292 on the incoming GW...

voice translation-rule 1
 rule 1 9005559292

voice translation profile...

uhhh...I'm lost here without my GWGK book...

dial-peer voice pots 1
voice t


--- "Voll, Scott" <Scott.Voll at wesd.org> wrote:

> Only if you are using a H323 VGW.  Then it's a
> matter of working your
> translation rules.
> 
>  
> 
> Scott
> 
>  
> 
> ________________________________
> 
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Corbett Enders
> Sent: Thursday, June 07, 2007 9:11 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Block incoming call based on
> their CallerID?
> 
>  
> 
> Can we block a call coming into our phone system
> (CM4.2) based on the
> source caller ID?  Any way of sending them to a fast
> busy signal instead
> of having the call ring our switchboard?
> 
>  
> 
> Corbett Enders
> 
> Business Development
> Homes by Avi Inc.
> Tel: (403) 536-7170
> Fax: (403) 536-7171
> Email: cenders at homesbyavi.com
> <mailto:cenders at homesbyavi.com>  
> www.homesbyavi.com <http://www.homesbyavi.com>  
> 
>  
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



 
____________________________________________________________________________________
TV dinner still cooling? 
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/