[cisco-voip] CME shared ephone-dn question

[Jeff Anderson (Enventis)]

I want to configure the following setup. Two shared lines on two
different buttons. Each ephone-dn accepts one inbound call supporting a
total of two calls. When the third call comes in I want it to go to VM.

This is what I have:

ephone-dn 1 dual-line
	number 1000
	label Main Line 1
	Preference 1
	huntstop-channel
	call-forward busy 2098
	call-forward noan 2098 timeout 18
	no huntstop

ephone-dn 2 dual-line
	number 1000
 	label Maine Line 2
	preference 2
	huntstop-channel
	call-forward busy 2098
 	call-forward noan 2098 timeout 18

Ephone 1
Button 1:1 2:2

Ephone 2
Button 1:1 2:2

2098 is VM pilot.


In the above scenario that call only rings in on one ephone-dn and goes
to VM. If I setup ephone-dn 1 to call-forward busy to 1000 it rings busy
on the third call.

Can someone please send me a configuration example of what I am trying
to accomplish.

Thanks

Jeff