[cisco-voip] seting network user side and bottom up for T1 duringSRST mode

[Lelio Fulgenzi]

ah - i see what you were getting at.

my hope was to have the configuration there from the get go, since it likely means a WAN failure and there would be no access to the EEM (if we even bought it).

thanks though.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

  ----- Original Message ----- 
  From: Alex 
  To: Lelio Fulgenzi ; cisco-voip at puck.nether.net 
  Sent: Friday, June 08, 2007 9:26 AM
  Subject: Re: [cisco-voip] seting network user side and bottom up for T1 duringSRST mode


  Lelio,
  My understanding is that you want a T1 (is it PRI?) on a SRST router to behave as "network side" when SRST is active. 
  Well, define EEM policy to monitor syslog for messages %IPPHONE-6-REGISTER_NEW  then define a policy action to execute CLI command to change T1 to "network side". Finally, test your EEM policy using this procedure http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f8b31.shtml#step8 
  Did I get your requirement correctly?
  Rgds
  Alex
    ----- Original Message ----- 
    From: Lelio Fulgenzi 
    To: Alex ; cisco-voip at puck.nether.net 
    Sent: Friday, June 08, 2007 2:04 PM
    Subject: Re: [cisco-voip] seting network user side and bottom up for T1 duringSRST mode


    how would that help?

    --------------------------------------------------------------------------------
    Lelio Fulgenzi, B.A.
    Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
    (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
    "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

      ----- Original Message ----- 
      From: Alex 
      To: Lelio Fulgenzi ; cisco-voip at puck.nether.net 
      Sent: Friday, June 08, 2007 9:00 AM
      Subject: Re: [cisco-voip] seting network user side and bottom up for T1 duringSRST mode


      Lelio,
      Would EEM be of any help? http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hnm_c/ch05/heem21.htm
      Cheers
      Alex
        ----- Original Message ----- 
        From: Lelio Fulgenzi 
        To: cisco-voip at puck.nether.net 
        Sent: Friday, June 08, 2007 1:50 PM
        Subject: [cisco-voip] seting network user side and bottom up for T1 duringSRST mode


        re: seting network user side and bottom up for T1 during SRST mode

        I don't see how to do this.

        I would have thought that the ccm-manager config statement would bring this sort of information down to the controller, but I don't see it. I checked the voice command reference, but still didn't see anything.



        --------------------------------------------------------------------------------
        Lelio Fulgenzi, B.A.
        Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
        (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
        "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR



------------------------------------------------------------------------


        _______________________________________________
        cisco-voip mailing list
        cisco-voip at puck.nether.net
        https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070608/fb38665b/attachment-0001.html