[cisco-voip] CUE: Access to personal mailbox from outside

[Paul Choi]

Do you honestly find waiting 15s that inconvenient?

You *could* assign your voicemail pilot to a real DID
number and then have users call it directly to check
their voicemail. That would give you your desired
result.

Paul

--- Anthony Kouloglou <akoul at dataways.gr> wrote:


---------------------------------
  Ok it is odd,
but keep in mind that i might have forward no answer
to 15 seconds tomy voicemail.
I have to call my extension from outside and wait 15
seconds to accessit and press *?
there is no other way?

Thanks
Anthony

Paul Choi wrote:  
I would have to concur. I would find it highly
oddyou're trying to check a voicemail box of someone
thatdoesn't have CFB/CFA set to to voicemail.Paul---
Sumit Marwah <smarwah at enetsolutions.net> wrote:  
      
When calling internally does the call go to thevoice
mail box of theextension if not answered? Also, do a 
'debug voipdialpeer all' andmaybe "debug voip ccapi
inout" to see when you dialthe Voice mail pilotnumber
and then enter the extension of the user whatdoes the
digittransform to.I think the reason you are getting
the message"There is no mailbox forthis extension,
please wait while I transfer you tothe operator"
isbecause the number you entered is getting
translatedto something elseand there is no mailbox for
that number. Also, onceyou find what numberis it
getting converted to you can either add thatto E164
field or youcan created a voice
translation.Regards,Sumit Marwah Sr. System
EngineerCCIE Voice # 17400 -----Original
Message-----From:
cisco-voip-bounces at puck.nether.net[mailto:cisco-voip-bounces at puck.nether.net]
OnBehalf Of Paul ChoiSent: Tuesday, June 12, 2007 1:52
AMTo: Anthony Kouloglou;
cisco-voip at puck-nether.netSubject: Re: [cisco-voip]
CUE: Access to personalmailbox from outsideDid you try
dialing the extension of the user youweretrying to
reach and then press * to escape intosign-in
mode?Paul--- Anthony Kouloglou <akoul at dataways.gr>
wrote:    
          
Hi,how can i set up the CUE so a user who has a      
        
mailbox    
          
can access it when calling from outside (PSTN).When i
call, i get connected to the Autoattendant,      
        
i    
          
press the internal extension that the VMPilotPoint has
and i get:"There is no mailbox for this extension,
please      
        
wait    
          
while i 'll transfer you to the operator"I use the AIM
card on a 2811 and i have 12 mailboxlicense. It is
integrated with a 5.0(4)
CCMCheers,Anthony_______________________________________________cisco-voip
mailing listcisco-voip at puck.nether.net      
        
https://puck.nether.net/mailman/listinfo/cisco-voip   

    
     
    
________________________________________________________________________
 
      
___________You snooze, you lose. Get messages ASAP
withAutoCheckin the all-new Yahoo! Mail Beta.    
    
http://advision.webevents.yahoo.com/mailbeta/newmail_html.html
 
      
_______________________________________________cisco-voip
mailing
listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
   
    

____________________________________________________________________________________Sucker-punch
spam with award-winning protection. Try the free
Yahoo! Mail
Beta.http://advision.webevents.yahoo.com/mailbeta/features_spam.html
 




       
____________________________________________________________________________________
Choose the right car based on your needs.  Check out Yahoo! Autos new Car Finder tool.
http://autos.yahoo.com/carfinder/