[cisco-voip] Subscriber hardware replacement

[Kris Seraphine]

I'm doing 4.02a to 4.13 upgrade tonight on a two-server cluster.  We will
also be replacing the Subscriber with a new 7835.  My initial plan was to:

Upgrade the cluster normally
Add the new server as a new subscriber
Make the necessary changes in ccmadmin (modify the callmanager groups
etc)
Remove the old subscriber

I'm wondering if there's a way to cut a few steps from the process.

I'm looking at the 'Replacing Servers During the Upgrde' section of
the 4.13upgrade document but it doesn't explain the procedure very
well.
It sounds like I might be able to give the new server the same hostname/IP
and install it into the cluster as a replacement.

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/install/upgrade/upg413/replace.htm#wp1040049

Am I understanding this correctly?

thanks
-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070612/fb6bcc54/attachment.html