[cisco-voip] incoming calls to fxo redirected AttendantDN but then disconnected

[gokhan senol]

hi 
i got ccm 4.1.3 and fxo ports connected fct's for gsm connections
Gateway and CCM has mgcp connection.
 on callmanager fxo port confıguration I configured Attendant DN for incoming calls into these fxo ports.

what is the relation of using batterey reversal command for directing the incoming calls to Attendant DN which is specifed on callmanager.

Because if i dont use battery reversal under fxo  port, calls directed to Attendant DN but only one time phone rings and then disconnects.

But if i use batterey reversal command calls go to the AttendantDN and call can be set up succeessfully.


any idea 
thansk
Gokhan


      ____________________________________________________________________________________
Shape Yahoo! in your own image.  Join our Network Research Panel today!   http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070620/fae87ca4/attachment.html