[cisco-voip] Ответ: How to add a timeout in TCL

[Daniel A. Abelski]

Thanks! Will try those.

2007/6/21, tele <tele at plexialab.it>:
> Ok hope that it's supported by the Cisco TCL implementation you can do:
>
> sleep 3
>
> or
>
> after [expr {int(3 * 1000)}]
>
> for do nothing for 3 seconds
>
>
>
> On Wed, 2007-06-20 at 22:35 +0600, Daniel A. Abelski wrote:
> > Hi All. Got a problem with ISDN link. As I see from the debug - some
> > times there are extra digits coming in E1 with a call. It means that
> > when outside caller dials XXXXXXX we get XXXXXXX and then 2-4 extra
> > digits...
> > There is a cisco tcl script that passes the callers to local users,
> > but if we get those extra digits - outside callers get destination
> > unknown. I need a fast solution - is there a way to make tcl script
> > wait for 1-3 sec before starting to collect digits from the trunk?
> >
> > Will be grateful for any help.
> >
>
>


-- 
Regards,                    |        С Уважением,
Daniel A. Abelski        |        Абельский Даниил Александрович