[cisco-voip] External Phone Number Mask

[Lelio Fulgenzi]

The same on the 7912, you have to modify the Line Text Label to display the extension. That's the only way I found. The 7910s used to have the same problem, so they added a CallManager service parameter Extension Display on Cisco IP Phone Model 7910*  that removed the external calling mask from the phone and displayed only the extension. Unfortunately, this does not help with the 7912s.

Interestingly enough, the 7911s do not have this problem. The DN is automatically lowered to the line below when an external calling mask is added to the DN configuration.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

  ----- Original Message ----- 
  From: Kelemen Zoltan 
  To: cisco-voip at puck.nether.net 
  Sent: Friday, June 22, 2007 8:05 AM
  Subject: [cisco-voip] External Phone Number Mask


  Hi!

  I have a CCM 4.1.3 and several 7905G phones. For soem of the phones I'd 
  like to apply separate External Phone Number Masks, but now the mask 
  appears on the phone instead of it's DN. Is there a way to keep the DN 
  in the upper-right corner, instead of the external phone mask?

  (I am using external phone masks on route patterns as well, but a few 
  phones need to have an external number that just doesn't fit that mask.)

  thanks,
    Zoltan
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070622/d3619f89/attachment.html