[cisco-voip] Valcom Configuration

[Carter, Bill]

it is an Analog (FXS) connection to the V-9970.  It is just a DN on the
analog port.

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ocampo, Walter
Sent: Friday, June 22, 2007 8:14 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Valcom Configuration



I had a remote location that has Valcom V-9970 and V-2003A 3 Zone
Enhanced, One-Way Power Built-In. They are not using it but it is
installed. We are going to install a Gateway with 1 PRI card, 2 FXS and
2 FXO ports- MGCP-Call manager 4.1(3). 

This is the first time I am going to adhere this devices to work in our
VoIP system. Any idea how I have to configure the gateway and call
manager to have this project working? 

Any help will be appreciate.

 

Regards,

 

 

Walter Ocampo

System Network Analyst

Office of Information Technology

540 S.E 3rd. Ave, Suite 300

Fort Lauderdale, FL 33301

(954) 357 8041 Cell (954) 632 8228

wocampo at broward.org <mailto:wocampo at broward.org> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070622/3cb6bd27/attachment.html