[cisco-voip] Valcom Configuration

Jason Aarons (US) jason.aarons at us.didata.com
Fri Jun 22 23:31:22 EDT 2007


The lack of disconnect supervision in V9970 makes this a poor design, I
would swap it out with a V2003 and plug it into a FXO port. With the
V9970 you risk the paging horn being stuck offhook until you either
reset the port or reset the V9970. Could be rare, but still annoying!

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Friday, June 22, 2007 5:43 PM
To: Ocampo, Walter; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Valcom Configuration

 

it is an Analog (FXS) connection to the V-9970.  It is just a DN on the
analog port.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ocampo, Walter
Sent: Friday, June 22, 2007 8:14 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Valcom Configuration

I had a remote location that has Valcom V-9970 and V-2003A 3 Zone
Enhanced, One-Way Power Built-In. They are not using it but it is
installed. We are going to install a Gateway with 1 PRI card, 2 FXS and
2 FXO ports- MGCP-Call manager 4.1(3). 

This is the first time I am going to adhere this devices to work in our
VoIP system. Any idea how I have to configure the gateway and call
manager to have this project working? 

Any help will be appreciate.

 

Regards,

 

 

Walter Ocampo

System Network Analyst

Office of Information Technology

540 S.E 3rd. Ave, Suite 300

Fort Lauderdale, FL 33301

(954) 357 8041 Cell (954) 632 8228

wocampo at broward.org

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070622/4c58bebc/attachment-0001.html 


More information about the cisco-voip mailing list