[cisco-voip] When dialing FXO I get Dial tone?

[Lelio Fulgenzi]

the mgcp dial-peers have to be first ahead of any h323 dialpeers

this was discussed on the list a while back, that's why i know. ;)

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

  ----- Original Message ----- 
  From: Voll, Scott 
  To: cisco-voip 
  Sent: Monday, June 25, 2007 3:19 PM
  Subject: [cisco-voip] When dialing FXO I get Dial tone?


  I setup a MGCP VGW with FXO.  I have set it in CM to forward to my extension(both).  CSS / Partitions seem to be right.  But when I call those FXO ports, I get dial tone.  What's up?  What am I doing wrong?

   

  Scott



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070625/78845062/attachment.html