[cisco-voip] number presentation on call forward

[Ryan Ratliff]

Depends on the router type (ie mgcp vs h323).   In your case though I  
doubt it's the redirecting IE, but rather the number CM is putting in  
the calling party IE.

-Ryan

On Jun 28, 2007, at 11:21 AM, Robert Kulagowski wrote:

Ryan Ratliff wrote:
> What is set for the calling party selection on your gateway?
> Do you have redirecting IE outbound enabled?
>
> What you need to see is what number, in what IE, is being passed to
> your telco.  This can be done via ccm trace or 'debug isdn q931' if
> you have a PRI.

Is there a way to have redirecting IE outbound enabled, but selectively
suppress it on the router?

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip