[cisco-voip] MeetingPlace MP-MA-4 PureIP how to check SmartBlade speed/duplex?
Jason Aarons (US)
jason.aarons at us.didata.com
Thu Mar 1 10:37:02 EST 2007
In the 8106 Audio Server how to I verify the MP-MA-4 ethernet port
speed/dupex for a Pure IP installation?
It appears I have a duplex mismatch with the 6509 and want to hardcode
the speed/duplex on the MP-MA-4 (SmartBlade).
memmza01:tech$ blade
Slot Card Type CardId Ports
---- ---- ---- ------ -----
1 CG6000C SB 0
2 no card
3 no card
4 no card
5 no card
6 TP1610-4 IP 0 0-89 (10.20.29.221)
***** B L A D E C O N F I G M E N U *****
1) View blade details
2) Modify blade
x) Exit program
Enter command: 1
Enter blade slot [1..6]: 6
Blade Slot: 6
MultiAccess Blade: 0
Blade Installed: TP1610-4
Blade Configured: TP1610-4
IP Address [0]: 10.20.29.221
IP Address [1]: 0.0.0.0
Subnet Mask: 255.255.255.0
Default Gateway: 10.20.29.1
Base Receive UDP Port [0]: 16390
Base Receive UDP Port [1]: 16390
Jitter Buffer Minimum Size: 100
Jitter Buffer Optimization: 7
IP Precedence: (unused)
Type of Service (TOS): (unused)
DSCP / DiffServ: 46
RTCP Interval: (default)
Port group: 1
Ports: 0-89
Press <Enter> to continue...
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070301/1c390b60/attachment-0001.html
More information about the cisco-voip
mailing list