[cisco-voip] MeetingPlace MP-MA-4 PureIP how to check SmartBladespeed/duplex?

[Timur Bayazitov]

It seems, there is no way to set duplex/speed manually. Anyway, we don't
have any problems with auto/auto settings using catalyst 3550/3560.
Best regards, Timur Bayazitov

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Thursday, March 01, 2007 6:37 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MeetingPlace MP-MA-4 PureIP how to check
SmartBladespeed/duplex?



In the 8106 Audio Server how to I verify the MP-MA-4 ethernet port
speed/dupex for a Pure IP installation?

 

It appears I have a duplex mismatch with the 6509 and want to hardcode the
speed/duplex on the MP-MA-4 (SmartBlade).

 

 

 memmza01:tech$ blade

 

Slot    Card    Type    CardId  Ports

----    ----    ----    ------  -----

 1      CG6000C  SB       0

 2      no card

 3      no card

 4      no card

 5      no card

 6      TP1610-4         IP       0     0-89 (10.20.29.221)

 

*****   B L A D E   C O N F I G   M E N U   *****

 

        1)  View blade details

        2)  Modify blade

        x)  Exit program

 

Enter command:  1

Enter blade slot [1..6]:  6

 

  Blade Slot:   6

  MultiAccess Blade:    0

  Blade Installed:      TP1610-4

  Blade Configured:     TP1610-4

 

  IP Address [0]:               10.20.29.221

  IP Address [1]:               0.0.0.0

  Subnet Mask:                  255.255.255.0

  Default Gateway:              10.20.29.1

  Base Receive UDP Port [0]:    16390

  Base Receive UDP Port [1]:    16390

  Jitter Buffer Minimum Size:   100

  Jitter Buffer Optimization:   7

  IP Precedence:                (unused)

  Type of Service (TOS):        (unused)

  DSCP / DiffServ:              46

  RTCP Interval:                (default)

  Port group:                   1

  Ports:                        0-89

 

Press <Enter> to continue...


  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070301/c723b504/attachment.html