[cisco-voip] very simple Q about voice cmd

[Patrick Diener]

> 1- How can I know the version of my installed CME?
CME Version is dependant on the used IOS Version:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a00805acf50.html

> 2- How can I transfer the required files from 2800 to 1700?
The core CME functions do not need additional files! The additional
files comprise of firmware loads for the different ip phones, the cme
gui files, b-acd script etc... you can download the appropriate files
for your CME version (IOS version) from CCO:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-key

Documentations for setup, configuration, etc:
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps4625/products_documentation_roadmap09186a0080189132.html
the "System Administration Guides" are good documents..

Regards
Patrick


On 3/6/07, George Sobhi <gsobhi at nileonebrokers.com> wrote:
> Dear Patrick,
> I have 2800 router with Version 12.4(4)XC with CME on it but I want to know
> many things :
> 1- How can I know the version of my installed CME?
> 2- How can I transfer the required files from 2800 to 1700?
>
> Regards,
> George
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Patrick Diener
> Sent: Tuesday, March 06, 2007 3:56 PM
> To: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] very simple Q about voice cmd
>
> use the IOS feature navigator to find the sutable software:
> http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
>
> -> "Search by Feature" -> type CME -> ...
>
> Patrick
>
> On 3/6/07, George Sobhi <gsobhi at nileonebrokers.com> wrote:
> > CME
> >
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Patrick Diener
> > Sent: Tuesday, March 06, 2007 3:09 PM
> > To: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] very simple Q about voice cmd
> >
> > IOS Feature Set installed? IP BASE, IP VOICE etc...
> > not all support "Voice"...
> >
> > what kind of config do you like to achieve? Voice Gateway, SRST Router,
> CME?
> >
> > Patrick
> >
> > On 3/6/07, George Sobhi <gsobhi at nileonebrokers.com> wrote:
> > >
> > >
> > >
> > >
> > > I have C1700 router with Version 12.4(1c), I want to configure it with
> > VOIP
> > > but the IOS doesn't accept voice commands, what I missed?
> > >
> > >
> > >
> > > Thanks in advance
> > >
> > >
> > >
> > > George Sobhi
> > >
> > > Technical Support Engineer
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>