[cisco-voip] very simple Q about voice cmd

[George Sobhi]

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-key
displays 
"Cisco Unified Communications Manager Express and SRST  
NOTE:
There are currently no files for this type."
 
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Patrick Diener
Sent: Tuesday, March 06, 2007 5:39 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] very simple Q about voice cmd

> 1- How can I know the version of my installed CME?
CME Version is dependant on the used IOS Version:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guid
e09186a00805acf50.html

> 2- How can I transfer the required files from 2800 to 1700?
The core CME functions do not need additional files! The additional
files comprise of firmware loads for the different ip phones, the cme
gui files, b-acd script etc... you can download the appropriate files
for your CME version (IOS version) from CCO:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-key

Documentations for setup, configuration, etc:
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps4625/products_docum
entation_roadmap09186a0080189132.html
the "System Administration Guides" are good documents..

Regards
Patrick


On 3/6/07, George Sobhi <gsobhi at nileonebrokers.com> wrote:
> Dear Patrick,
> I have 2800 router with Version 12.4(4)XC with CME on it but I want to
know
> many things :
> 1- How can I know the version of my installed CME?
> 2- How can I transfer the required files from 2800 to 1700?
>
> Regards,
> George
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Patrick Diener
> Sent: Tuesday, March 06, 2007 3:56 PM
> To: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] very simple Q about voice cmd
>
> use the IOS feature navigator to find the sutable software:
> http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
>
> -> "Search by Feature" -> type CME -> ...
>
> Patrick
>
> On 3/6/07, George Sobhi <gsobhi at nileonebrokers.com> wrote:
> > CME
> >
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Patrick Diener
> > Sent: Tuesday, March 06, 2007 3:09 PM
> > To: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] very simple Q about voice cmd
> >
> > IOS Feature Set installed? IP BASE, IP VOICE etc...
> > not all support "Voice"...
> >
> > what kind of config do you like to achieve? Voice Gateway, SRST Router,
> CME?
> >
> > Patrick
> >
> > On 3/6/07, George Sobhi <gsobhi at nileonebrokers.com> wrote:
> > >
> > >
> > >
> > >
> > > I have C1700 router with Version 12.4(1c), I want to configure it with
> > VOIP
> > > but the IOS doesn't accept voice commands, what I missed?
> > >
> > >
> > >
> > > Thanks in advance
> > >
> > >
> > >
> > > George Sobhi
> > >
> > > Technical Support Engineer
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip