[cisco-voip] Nagios check for ISDN line on a 6608

[David Sullivan]

Hi

We use Nagios to check all of our services (well, as many as we can) and
I've recently added checks all of our ISDN30 (PRI) and ISDN2 (BRI) lines
using the following and everything is working swimmingly:

service_description             ISDN2
check_command
check_snmp!1.3.6.1.2.1.10.20.1.3.4.1.2.2!2:3!1:0

service_description             ISDN30
check_command
check_snmp!1.3.6.1.2.1.10.20.1.3.4.1.2.22!2:0!4

Where the last number of the SNMP oid for the isdn interface is worked
out by using snmpwalk

We have one ISDN30 that terminates on a 6608 that I'd like to monitor
the state of, the only way I can appear to do this is to screen scrape
the web server of the port (since it doesn't talk SNMP) or possibly pull
the state of the line from Callmanager, has anyone done this at all or
know which bit to start looking at?

David Sullivan
IT Services
-----------------------------------------------------------------------------
This communication may contain privileged or confidential information which
is for the exclusive use of the intended recipient.  If you are not the
intended recipient, please note that you may not distribute or use this
communication or the information it contains.  If this e-mail has reached you
in error, please delete it and any attachment.

Internet communications are not secure and Barnet College does not accept
legal responsibility for the content of this message.  Any views or opinions
expressed are those of the author and not necessarily those of Barnet College.

Please note that Barnet college reserves the right to monitor the
source/destinations of all incoming or outgoing e-mail communications.
-----------------------------------------------------------------------------