[cisco-voip] USB Serial Adapter for Console Port

[Voll, Scott]

Are you sure it's the USB adapter and not the application?

http://www.cisco.com/warp/public/701/61.html

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Adam
Sent: Tuesday, March 06, 2007 8:37 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] USB Serial Adapter for Console Port

I just sat here and spent the last couple of hours banging my head
against a wall trying to work out why I couldn't break the boot
sequence on a router to do a password reset when I finally discovered
that it was my USB serial adapter (Belkin F5U109). Apparently this
device is incapable of sending a break signal. As soon as I tried it
from a desktop with a real serial port it worked just fine. Does
anyone have a suggestion for a USB adapter that will work in this
situation.

Thanks,
Adam
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip