[cisco-voip] USB Serial Adapter for Console Port

[Adam]

Yep... positive of it. I tried the same application using the same key
sequence and it worked with real serial port instead of the USB one.

On 3/6/07, Voll, Scott <Scott.Voll at wesd.org> wrote:
> Are you sure it's the USB adapter and not the application?
>
> http://www.cisco.com/warp/public/701/61.html
>
> Scott
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Adam
> Sent: Tuesday, March 06, 2007 8:37 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] USB Serial Adapter for Console Port
>
> I just sat here and spent the last couple of hours banging my head
> against a wall trying to work out why I couldn't break the boot
> sequence on a router to do a password reset when I finally discovered
> that it was my USB serial adapter (Belkin F5U109). Apparently this
> device is incapable of sending a break signal. As soon as I tried it
> from a desktop with a real serial port it worked just fine. Does
> anyone have a suggestion for a USB adapter that will work in this
> situation.
>
> Thanks,
> Adam
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>