[cisco-voip] CallManager 3.2 - Dialled Number Analyser

[Ryan Ratliff]

I don't think 3.2 even had the route plan report.   Your best bet is  
to set up a softphone for testing remotely.

-Ryan

On Mar 8, 2007, at 9:48 AM, Johnny Crothers wrote:

Anyone know of anything similar to the Dialled Number Analyser that  
runs on CCM 3.3 and above? I have a customer with 3.2 and I’m trying  
to run a couple of tests remotely. Is there something else in this  
version I can use?




**********************************************************************
Any opinions expressed in the email are those of the individual and  
not necessarily the company. This email and any files transmitted  
with it are confidential and solely for the use of the intended  
recipient. If you are not the intended recipient or the person  
responsible for delivering it to the intended recipient, be advised  
that you have received this email in error and that any  
dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned  
with the content of this email please e-mail to: e- 
security.support at vanco.info

The contents of an attachment to this e-mail may contain software  
viruses which could damage your own computer system. While the sender  
has taken every reasonable precaution to minimise this risk, we  
cannot accept liability for any damage which you sustain as a result  
of software viruses. You should carry out your own virus checks  
before opening any attachments to this e-mail.

Vanco UK Ltd Registered in England No: 2296733 Registered Office:  
John Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX
**********************************************************************
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip