[cisco-voip] Outbound call routing

[Patrick Diener]

If you are connecting the PBX using a H323 Gateway you could introduce
this short pause using a comma in the destination-pattern of the
outbound pots dial-peer...

On 3/13/07, James Williams <JWilliams at ci.carson-city.nv.us> wrote:
> > In your route pattern, you could setup something like 8.@
> > On called party tranforms, do a Discard Predot and prefix digits
> 9200
> >
> > That should probably work.  You can make the route pattern more
> > complicated if you want, but the above will at least let you know if
>
> > you're on the right track.
>
> This is what I figured should work, but it immediately gives me a
> routing error message as soon as the interdigit timeout expires. Let's
> say I'm dialing 555-1212; I need to be able to dial the following on a
> phone:
>
> 85551212
>
> and have it translated to the following before it hits the PRI to the
> PBX:
>
> 9200 <short pause... 0.5s or so> 5551212
>
> Is this possible?
>
> -James
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>