[cisco-voip] Outbound call routing

[James Williams]

> In your route pattern, you could setup something like 8.@
> On called party tranforms, do a Discard Predot and prefix digits
9200
>
> That should probably work.  You can make the route pattern more 
> complicated if you want, but the above will at least let you know if

> you're on the right track.

This is what I figured should work, but it immediately gives me a
routing error message as soon as the interdigit timeout expires. Let's
say I'm dialing 555-1212; I need to be able to dial the following on a
phone:

85551212

and have it translated to the following before it hits the PRI to the
PBX:

9200 <short pause... 0.5s or so> 5551212

Is this possible?

-James