[cisco-voip] Third Gen Phone Load 8.0(4)sr2 deferral?

[Jeff Anderson]

Can anyone elaborate?

I noticed on this doc:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_field_notice09186a00807d3d9e.shtml

They have the following revision. "Removed reference to 8.0(4) SR2 and replaced with 8.0(4) SR3 and removed caveat below table in Workaround/Solution section."

The reason I want to know more specifics is because I have a large client that is running 8.0(4)sr2 and they are not having any DST issues that I know of. I am trying to determine if an upgrade is necessary. I would like to know why they changed the document to say SR3 instead of SR2.

Thanks,

Jeff 


-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Thursday, March 15, 2007 11:58 AM
To: Jeff Anderson
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Third Gen Phone Load 8.0(4)sr2 deferral?

Probably because it's not DST compliant.

-Ryan

On Mar 15, 2007, at 12:41 PM, Jeff Anderson wrote:

Does anyone know the reason why phone load 8.0(4)sr2 has been deferred?



Thanks,

-jeff



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip