[cisco-voip] Do you have phones (7970) still with incorrect time?READ ME

[Candace Holman]

It's not quite the same bug, as the description of cscsh12444 says " Ed 
Leatherman wrote:
> I think Wes sent out a msg yesterday that had the bugID in it, was 
> amongst the other DST bugs
>
> On 3/15/07, *Voll, Scott* < Scott.Voll at wesd.org 
> <mailto:Scott.Voll at wesd.org>> wrote:
>
>     Wes, mike, ryan, Tac guys—
>
>     Do we have a Bug ID on this? I just tested with both a 7970 and a
>     7941 and if I reboot them they go back to the old time. Then I
>     have to go in and reset the device. When is this going to be fixed?
>
>     Scott
>
>     ------------------------------------------------------------------------
>
>     *From:* cisco-voip-bounces at puck.nether.net
>     <mailto:cisco-voip-bounces at puck.nether.net> [mailto:
>     cisco-voip-bounces at puck.nether.net
>     <mailto:cisco-voip-bounces at puck.nether.net>] *On Behalf Of
>     *Corbett Enders
>     *Sent:* Thursday, March 15, 2007 10:51 AM
>     *To:* cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     *Subject:* [cisco-voip] Do you have phones (7970) still with
>     incorrect time?READ ME
>
>     I've been following the threads on here and to this day I still
>     have had 7970 phones with the incorrect time even though they have
>     the latest phone load, etc.
>
>     Well, this document finally explains the answer and basically one
>     final step is required.
>
>     Go into CCMAdmin and reset the phone. Bingo, correct time. And to
>     make this even worse, each time the 7970 phones lose power and
>     reboot, they'll reboot with the incorrect time and you'll have to
>     reset them again via CCMAdmin. Until this is fixed in a new phone
>     load of course.
>
>     Read more at this link:
>
>     http://www.cisco.com/en/US/customer/products/hw/phones/ps379/products_field_notice09186a00807d3d9e.shtml
>
>     ****IMPORTANT NOTE***: For 7906G, 7911G, 7941G/GE, 7961G/GE,
>     7970G, 7971GE, in addition to the above phone loads, there is one
>     manual workaround that will be needed in order to get the phones
>     to display the correct time.*
>
>     There is a Daylight Savings Time issue which will be fixed in an
>     upcoming phone release, having the following workaround:
>
>     - Reset the IP phone from the CCMAdmin for the phone to get the
>     correct time.
>
>     Please be aware that each time IP Phones lose power, the System
>     Administrator will need to reset the IP Phones from CCMAdmin to
>     get the correct time.
>
>     *Corbett Enders*
>
>     Business Development
>     Homes by Avi Inc.
>     Tel: (403) 536-7170
>     Fax: (403) 536-7171
>     Email: cenders at homesbyavi.com <mailto:cenders at homesbyavi.com>
>     www.homesbyavi.com <http://www.homesbyavi.com>
>
>
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> -- 
> Ed Leatherman
> Senior Voice Engineer
> West Virginia University
> Telecommunications and Network Operations
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>